LeCroy LECROY WS Series Remote Control free download

File name LECROY WS Series Remote Control.pdf

WAVESURFER OSCILLOSCOPE Errata Sheet for Remote Control Manual Most of the commands contained in the Remote Control Manual for the WaveMasterTM DSO and other X-StreamTM instruments apply also to the WaveSurfer oscilloscope. There are also two new WaveSurfer scope commands that are not in the manual. The Remote Control Manual can be found in the Technical Library at LeCroy's Web site http://www.lecroy.com. Please refer to the following table for additions, exclusions, and modifications. Command Status Notes COMBINE_CHANNELS Not Applicable Allowed modes: CUST [,STAT], FAIL, HREL [,ABS, DELTA, CURSOR_MEASURE Modified SLOPE], OFF, PASS, VREL [,ABS, DELTA] Allowed traces: F1, F5, F6, F7, F8, TA, C1, C2, C3, C4, M1, M2, CURSOR_SET Modified M3, M4 F5 to F8 correspond to Z1 to Z4, respectively. CURSOR_VALUE? Modified Allowed traces: F1, F5, F6, F7, F8, TA, C1, C2, C3, C4 CURSORS Not Applicable Allowed function is F1 only. DEFINE Modified Not all function parameters are allowed. FUNCTION_RESET Modified Allowed functions: F1 or TA. GRID Modified Allowed arguments: SINGLE, XYONLY, XYSINGLE Allowed prefixes: HOR_MAGNIFY Modified TA or F1 for the Math trace Z1 to Z4 for F5 to F8 F2 to F4, TB to TD are not valid Allowed prefixes: HOR_POSITION Modified TA or F1 for the Math trace Z1 to Z4 for F5 to F8 F2 to F4, TB to TD are not valid This command sets the input impedance. Syntax: IMPEDANCE New :IMPEDANCDE := A1M, D1M, D50, GND, 0VL For external trigger: D50, D1M, GND Allowed prefixes: C1 to C4 for channel traces INSP? Modified M1 to M4 for memory traces TA or F1 for the Math trace